How to Sand Wood

: Always wear safety goggles when operating power tools, and wear a dust mask while sanding.
Step 1: Select sandpaper Choose a sandpaper grit that works for your project. The rougher the wood, the coarser paper you should use.
TIP: Start with a medium grit like number 80, which can remove scratches and dents.
Step 2: Select a tool Select your tool. A random-orbit finishing sander is a versatile choice. For smaller jobs and hard-to-reach spots, consider sanding by hand with the help of a sanding block.
TIP: Scribble in pencil over the sanding surface – when the marks are gone, you’re done.
Step 3: Sand Sand with – not against – the grain. Apply even pressure so you don’t gouge the wood or create high and low spots.
Step 4: Clear the dust Remove dust from all surfaces using a shop vacuum.
Step 5: Repeat Repeat the previous steps, each time moving to finer sandpaper. With each sanding, you will find yourself one step closer to a perfect finish.
FACT: Sandpaper was once called glass paper because it was made with glass particles.

Lessons in this Guide