Instructions
- Step 1: Soak the paper Tear the scrap paper into pieces and soak in a bucket of warm water for 30 to 45 minutes.
- TIP: Do not use glossy, coated paper.
- Step 2: Grind the paper Take the paper from the bucket and grind it in the blender until it takes on a mushy, porridge-like consistency.
- TIP: Blend 1 cup of paper at a time to avoid overworking your blender.
- Step 3: Cut and insert screen Cut the screen to fit the pan. Overlap the sides for easy removal later. Put the screen in the pan.
- Step 4: Add water Add an inch of water to the pan.
- Step 5: Add mush Spread the paper mush evenly over the screen in the pan, one-eighth inch deep.
- Step 6: Drain water Lift the edges of the screen, pulling the mush out of the water. Allow the water to drain.
- Step 7: Prepare to iron Place the screen on a dishtowel. Fold the towel over the mush mixture.
- Step 8: Iron the mush Iron over the dish cloth with your iron on high. This presses the water from the mush and makes for faster dry time.
- Step 9: Allow 24 hours to dry After 24 hours, your paper is ready!
- FACT: A single piece of paper can be recycled five to seven times.
You Will Need
- Scrap paper
- A bucket
- A blender
- Scissors
- A window screen
- A 4-inch deep pan
- An iron
- Dishtowels
